Installing and presetting your advertising slogan

You don’t have to program the values that go into the preset in the traditional sense. Instead, the system takes a “snapshot” of the current values on your machine when you define the preset. For example, if the machine is set up to print an ad, no class is selected, and a postage amount is already on the screen, these are the conditions that will be recorded by your system when you define the preset feature

To select an Ad/logo
 

• From the Home screen, press the down Review ▼ key until “Ad:”is displayed.
• Press Enter/yes to confirm.
• Press the Review ▲▼ keys until you see the Ad required, then press Enter/yes to confirm.
• You will now return to the Home screen with the Ad selected for printing.
• If you wish your preset to include other items such as a postal value, etc. set these now as described in Chapter 3 of the Online Operating Guide.

To store your settings as a preset

• Press Options.
• Use the Review ▲▼ keys to scroll to "Change Setup?", then press Enter/yes to confirm.
• Use the Review ▲▼ keys to scroll to "Use Preset Setup?", then press Enter/yes to confirm.
• At the "Turn Preset on? Y/N" prompt, press Enter/yes.
• At the "New postal rates since preset created" prompt, press Enter/yes.
• Use the Review ▲▼ keys to scroll to "Store new preset?", then press Enter/yes to confirm.
• Press No when the system displays "Review settings to be stored?".
• At the "Confirm store new preset" prompt, press Enter/yes.
• Press No when the system displays "View new preset?".
• Press No when the system displays "Stay in setup?".

Your new preset is now stored.